Features
WA530-WW
Weight
0.34kg
Dimensions (excluding mounting accessories)
170 x 170 X35.5mm
Speed
867Mbps (5G)
400Mbps (2.4G)
Fixed port
Two 10/100/1000Mbps Ethernet ports (one of two works on PoE+)
Network ports support link aggregation (LACP) for redundancy and increased capacity
One console port
One USB port
Local power supply
54VDC
Built-in antenna
Dual-band low-E omni-directional antenna
Antenna gain
2.4GHz: 3.8dBi
5GHz: 3.1dBi
Maximum transmit power (Combined power, limited by local laws and regulations)
2.4GHz: 18dBm
5GHz: 23dBm
(Transmit power is multi-chain combined power, no antenna gain is included. The actual transmit power depends on local laws and regulations)
Adjustable power
1dBm
Power consumption
<12.95W (without USB)
Radio Specifications:
Max. number of STA per radio
256
Radio Specifications:
Max. number of SSIDs per radio
16
Operating temperature/storage temperature
Operating Tem: -10 ºC ~ 55 ºC ; 0ºC～45ºC(Recommended)
Storage Tem: -40ºC～70ºC
Operating humidity/storage humidity
5% to 95% (non-condensing)
PoE
802.3af/802.3at compatible power supply
Operating frequencies
802.11ac/n/a : 5.725GHz-5.850GHz ; 5.47～5.725GHz; 5.15~5.35GHz
802.11b/g/n : 2.4GHz-2.483GHz
Modulation
OFDM: BPSK@6/9Mbps, QPSK@12/18Mbps, 16-QAM@24Mbps, 64-QAM@48/54Mbps
DSSS: DBPSK@1Mbps, DQPSK@2Mbps, CCK@5.5/11Mbps
MIMO-OFDM (11n): MSC 0-15 (0-31 for WA560)
MIMO-OFDM (11ac): MCS 0-9
Modulation mode
11b: DSS: CCK@5.5/11Mbps, DQPSK@2Mbps, DBPSK@1Mbps
11a/g: OFDM: 64QAM@48/54Mbps, 16QAM@24Mbps, QPSK@12/18Mbps, BPSK@6/9Mbps
11n: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM
11ac: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM
Safety compliance
IEC 60950-1, EN 60950-1
EMC
EN 301489-1, EN 301489-17, EN 55032, EN 55024, EN 60601-1-2
Radio frequency certification
EN 300 328, EN 301 893
Health
EN 50385
Positioning
Indoor 802.11ac Wave2 AP
11ac Supported Streams
5G: 2x2
2.4G: 2x2
20/40/80MHz mode
√
MU-MIMO
√
1733Mbps (PHY)
√
A-MPDU
√
A-MSDU
√
Maximum likelihood demodulation (MLD)
√
Maximal ratio combining (MRC)
√
Spatial-Time block coding (STBC)
√
Low-density parity check (LDPC)
√
CDD/CSD
√
DFS
√
WLAN basics
Virtual Aps
16/radio
Open system/shared key authentication
√
Broadcast Probe acknowledge control
√
Mixed connection for WPA, WPA2,WPA3 and Pre-RSNA users
√
RTS/CTS
√
CTS-to-self
√
Concealed SSID
√
Hotspot 2.0
√
WLAN extended
STA related
STA offline anomaly check, STA aging, statistics and status query
Limit user number
√
Link integrity check
√
Security
Encryption
WEP-64/128/152bit, dynamic WEP, TKIP, CCMP,WPA3
Multiple encryption key triggered dynamic unicast/multicast key update
802.11i
√
Authentication
802.1X, MAC address authentication, PSK authentication, Portal, PPSK (May need to work with H3C Access Controller depending on application)
User Isolation
Supported:
1. Layer 2 forwarding restriction
2. Virtual AP (multiple SSIDs) isolation
Forwarding security
Packet filtering, MAC address isolation
SSID and VLAN binding
√
Wireless Intelligent Application Aware (wIAA)
√
WIDS/WIPS
√
802.11w
√
AAA
Radius Client
√
Multiple-domain authentication server
√
Backup authentication server
√
Layer 2 and layer 3 features
IP address configuration
Static IP (available only in fat AP mode)
DHCP assigned IP (option 60)
Native IPv6
√
IPv6 Portal
√
IPv6 SAVI
√
ACL
IPv4/IPv6
Local forwarding
Local forwarding based on SSID+VLAN
Multicast enhancement
IGMP Snooping/MLD Snooping
QoS
802.11e
Wi-Fi Multimedia (WMM)
Priority
Ethernet port based 802.1p identification and marking priority
Priority mapping for wired and wireless connection
Strategic QoS mapping
Distinctive QoS strategies based on individual SSID/VLAN
Layer 2 to Layer 4 packet filtering and traffic classification
√
CAR
√
User bandwidth management
Bandwidth allocation per STA, or all STAs sharing bandwidth with a common SSID
Load balancing
User/traffic/radio (dual frequencies) based
Spectrum Guide
√
Multicast enhancement
Multicast to Unicast (IPv4, IPv6)
CAC(Call Admission Control)
User number/bandwidth based
SVP Phone
Bandwidth allocation per STA, or all STAs sharing bandwidth with a common SSID
Green features
Per-packet power control (PPC)
√
Green AP mode
√
Dynamic MIMO power saving
√
Enhanced automatic power save delivery (E-APSD)
√
WMM Power Save
√
Management and maintenance
Network Management
Trap, HTTP(S), SSH, Telnet, FTP/TFTP, SNMP V1/V2/V3 only applicable in Fat mode
Managed SSID
√
Log function
SYSLOG
Remote probe analysis
√
AP Working Mode
Fit/Fat & Anchor (not included WA510H,WA530,WA560)
Wi-Fi Certified
IEEE 802.11a/b/g/n/ac, WMM, WPA, WPA2 and WPA3 – Enterprise, Personal (SAE), Enhanced Open (OWE)
There are no reviews yet.