HPE Aruba 2530 8 PoE+ Switch (J9780A)

SKU: J9780A

R7,519.00 Incl. VAT

Out of stock

Want to be notified when this product is back in stock?

Specifications

HPE Aruba 2530 8 PoE+ Switch (J9780A) – 8 x RJ-45 autosensing 10/100 PoE+ ports (PoE capability: 67W), 2 x dual-personality ports – each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-Tx, IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a SFP slot (for use with SFP transceivers) ports

What's in the Box

HPE Aruba 2530 8 PoE+ Switch (J9780A), Power cord

Warranty

Limited Lifetime Warranty

System Specifications
Ports

8 RJ-45 autosensing 10/100 PoE+ ports (IEEE 802.3 type 10BASE-T, IEEE 802.3u type 100BASETX, IEEE 802.3at PoE+)
Media type: Auto-MDIX
Duplex: Half or full
2 Dual-Personality ports; Each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 type 10Base-T; IEEE 802.3u type 100Base-Tx; IEEE 802.3ab 1000Base-T GbE) or as a SFP slot (For use with SFP transceivers) ports

Additional ports and slots
1 Dual-Personality (RJ-45 or USB Micro-B) serial console port

Memory and processor
ARM9E @ 800 MHz, 128MB flash
Packet buffer size: 1.5MB dynamically allocated, 256MB DDR3 DIMM

Mounting
Mounts in an EIA-Standard 19-inch telco rack or equipment cabinet (Rack-Mounting kit available)
Horizontal surface mounting
Wall mounting

Management
IMC
CLI
Web browser
Configuration menu
Out-of-Band management (Serial RS-232C or Micro-USB)
IEEE 802.3 Ethernet MIB
Repeater MIB
Ethernet interface MIB
Performance (IPv6 Ready Certified)

Description
1000Mb latency
< 2.3Āµs (LIFO 64-byte packets) 100Mb latency < 1.3 Āµs (LIFO 64-byte packets) Througput
Up to 4.1 Mp/s (64-byte packets)

Switching capacity
5.6 Gb/s

MAC address table size
16000 entries

Physical Specifications
Dimensions (H x W x D)

4.45 x 25.4 x 15.95 cm (1.75 x 10.00 x 6.28 in)
1U height

Weight
2.0 lb (0.91 kg)

Electrical Specifications
Maximum heat dissipation

29 BTU/hr (30.6 kJ/hr), (Switch only: 29 BTU/hr; Combined switch + maximum PoE devices: 262 BTU/hr)

Voltage
100 - 127 / 200 - 240 V ac

Current
1.4 A

Idle power
5.8 W

Maximum power rating
76.7 W

PoE power
67 W

Frequency
50/60 Hz

NOTE:
Idle power is the actual power consumption of the device with no ports connected
Maximum power rating and maximum heat dissipation are the Worst-Case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (If equipped), 100% traffic, all ports plugged in, and all modules populated. PoE power is the total power budget available to all PoE ports

Environmental Specifications
Operating temperature

0Ā° to 45Ā°C (32Ā° to 113Ā°F)

Operating relative humidity
15% to 95% @ 40Ā°C (104Ā°F), noncondensing

Non-Operating/storage temperature
(-40Ā°) to 70Ā°C ((-40Ā°) to 158Ā°F)

Non-Operating/storage relative humidity
15% to 90% @65Ā°C (149Ā°F), noncondensing

Altitude
Up to 3 km (10,000 ft)

Acoustic
Power: 0 dB, pressure: 0 dB

Safety Certifications
Safety

UL 60950-1
CAN/CSA 22.2 No. 60950-1
EN 60825
IEC 60950-1
EN 60950-1

Emissions
FCC Class A
EN 55022/CISPR-22 Class A
VCCI Class A

Immunity
Generic: EN 55024, CISPR 24
EN: EN 55024, CISPR 24
ESD: IEC 61000-4-2
Radiated: IEC 61000-4-3
EFT/Burst IEC: 61000-4-4
Surge: IEC 61000-4-5
Conducted: IEC 61000-4-6
Power frequency magnetic field: IEC 61000-4-8
Voltage dips and interruptions: IEC 61000-4-11
Harmonics: EN 61000-3-2, IEC 61000-3-2
Flicker: EN 61000-3-3, IEC 61000-3-3

Reviews

There are no reviews yet.

Be the first to review “HPE Aruba 2530 8 PoE+ Switch (J9780A)”

Similar Products
by other Manufacturers